VENTAS Y ATENCION TELEFONICA - Lunes a Viernes de 10.30 a 20.30

ABIERTO AL PUBLICO - Lunes a Jueves de 14.30 a 20.30 hs 

  divider  
  divider  

Tannoy Par de Bafles Revolution DC 4 T

 

Tannoy Par de Bafles Revolution DC 4 T

 

 

 

Revolution DC4 T
Audiophile crossover
Low loss laminated core inductors and audiophile-grade polypropylene capacitors are used exclusively throughout the Revolution range. This no-compromise approach ensures the best possible signal integrity to both the HF and LF sections of the Dual Concentric™ driver, enhancing the pin-sharp imaging and point-source musical integrity for which Tannoy’s ‘Dual’ driver is famed.

Optimum signal path
To minimise pathway signal losses and reduce interaction between individual components, internal structure and component topology is kept as simple as possible. This attention to fine detail runs throughout the Revolution design.

Precious metal components
Silver-plated, high purity oxygen-free copper internal wiring and chromed speaker terminals are a true high-end feature of the Revolution range. These exotic components offer low-loss, high current signal transfer to ensure every musical nuance is reproduced.

Trapezoid cabinets
Giving Revolution its distinctive look and compact footprint, the trapezoidal cabinet design reduces internal resonances and reflections. Bbass driver for added bass extension and low frequency impact.  The acoustically ideal from of the trapezoid cabinet and extensive internal bracing enhances rigidity, reduces internal reflections and delivers incredibly low cabinet colouration. For increased stability and better mechanical grounding the DC4T is supplied with an attractive base plinth.

 

Recommended Amplifier Power
(Watts RMS)
20 - 125
Continuous Power Handling
(Watts Peak RMS)
62
Peak Power Handling (Watts) 250
Sensitivity (2.83 Volts @ 1m) 87dB
Nominal Impedance (Ohms) 8
Frequency Response (-6dB) 54Hz - 54kHz
Dispersion (Degrees Conical) 90
DRIVE UNIT
Dual Concentric™ High Frequency 19mm (0.75”) titanium dome 
with tulip WaveGuide™
Dual Concentric™ Low Frequency 100mm (4.00”) treated paper pulp cone with rubber surround. 33mm (1.33”) edge wound voice coil
Bass Driver 100mm (4.00") treated paper pulp cone with rubber surround. 33mm (1.33") edge wound coil
CROSSOVER
Crossover Frequency 1.5kHz
Crossover Type Passive low loss 2nd order LF, 1st order HF
CONSTRUCTION
Enclosure Type Rear ported
Magnetic Shielding Yes
Volume 11.73L (0.414 cu. ft.)
Dimensions (excl grille) H x W x D 850 x 152 x 162mm
(33.46 x 5.98 x 6.38”)
Weight 9.1kg (20.1lbs)
Finish Light oak and Espresso

 

Para obtener información adicional acerca de Arcap Electrónica, productos y servicios o para hablar con un representante, póngase en contacto con Arcap Electrónica al (011) 4704-9289  o en envíe un mail a ventas@arcapelectronica.com.ar para que un Representante entre en contacto con usted.
 

 Siga con Nosotros en:  Visit our Facebook Fan Page!Follow us on Twitter!Follow us on Twitter!  

 Mapa del Sitio/ Enlaces Directos 

Términos y Condiciones 

·            Asistencia Posventa 

·            Garantía de los Productos 

 

 Información

·            Antecedentes  

·            Aplicaciones 

·            A cerca de Arcap

Servicios 

·            Aislamiento Acùstico 

·            Instalación Audio/Video 

·            Soluciones Residenciales 

·            Soluciones Comerciales 

·            IT Conectividad

·            Servicio Técnico-Reparación

Audio Profesional 

·            Potencias 

·            Bafles de Colgar

·            Parlantes de Embutir


Video 

·            Proyectores

·            Ascensores de TV 

·            Ascensor de Proyector

·            Pop Up

·            Pantallas de proyección

 

 

 Audio Hogar  

·            Bafles Cine en Casa

·            Bafles Columnas

·            Sintoamplificador 

·            Subwoofers 

·            Bafles de embutir  

·            Bafles Arquitectònicos  

·            Audio Digital 

Control 

·            Domótica Residencial 

·            Domótica Comercial